Product Overview

MSI Bedford FieldStone Splitface Marble Veneer Corners provide authentic wrapped transitions for Bedford FieldStone loose-veneer installations. Crafted from genuine natural marble, the random L-shaped corner pieces combine warm brown, taupe and layered gray tones with a rugged splitface texture.

Unlike modular ledger panels, Bedford FieldStone uses irregular loose stones that recreate the character of traditional hand-laid masonry. The corner pieces allow this organic pattern to continue around columns, exterior façades, fireplace projections, outdoor kitchens, pillars and garden-wall returns without exposing flat saw-cut edges.

This listing represents one full crate covering approximately 50 square feet of exposed corner-veneer surface.

Technical Specifications

MSI confirms the marble composition, brown-and-gray coloration, splitface finish, moderate variation and corner SKU LVENMBEDFORFLD-COR on its official Bedford FieldStone page.

Recommended Applications

• Exterior façades: Finishes outside building corners while maintaining a continuous hand-laid fieldstone appearance.

• Columns and pillars: Wraps square and rectangular architectural structures without exposed cut edges.

• Fireplace projections: Creates natural transitions around projecting fireplace surrounds and chimney breasts.

• Outdoor kitchens: Finishes barbecue islands, bar structures and outdoor entertainment areas.

• Garden walls: Provides authentic stone returns over structurally sound concrete or masonry walls.

• Interior feature walls: Suitable for approved residential and commercial accent walls, entries and hospitality installations.

• Backsplash corners: MSI lists Bedford FieldStone for indoor and outdoor walls and backsplashes.

Installation Guidelines

⚠️ IMPORTANT: INSTALL CORNERS BEFORE FLAT STONES

Establish the outside corners first, then fit the coordinating Bedford FieldStone flat veneer into the corner returns.

• Alternate returns: Reverse long and short returns throughout the installation to prevent continuous vertical seams.

• Substrate preparation: Install over an approved concrete, masonry or code-compliant framed-wall veneer system.

• Exterior framed walls: Provide the required weather-resistant barrier, flashing, drainage plane, metal lath and properly cured scratch coat.

• Mortar selection: Use a premium mortar specifically formulated for adhered natural-stone veneer and the installation environment.

• Mortar contact: Apply mortar to the prepared substrate and back of each stone as required. Completely support each corner piece without substantial voids.

• Blend before setting: Pull pieces from throughout the crate to distribute brown, gray, taupe and darker stones evenly.

• Joint design: Bedford FieldStone may be installed with visible mortar joints or tighter joints depending on the approved system and desired masonry appearance.

• Integrate matching flats: Use Bedford FieldStone flat veneer, SKU LVENMBEDFORFLD, between the established corner courses.

• Exterior drainage: Include flashing, weeps, terminations and movement accommodation to prevent trapped water behind the veneer.

• Fireplace installation: Follow fireplace-manufacturer clearances and local building codes. Do not use the corner veneer as a horizontal hearth surface.

• Height and weight: Tall façades, columns and overhead installations may require engineering or mechanical support.

• Wet cutting: Use wet-cutting methods and a suitable diamond blade. MSI warns against dry cutting because of hazardous crystalline-silica dust.

• Order allowance: Add approximately 10–15% for fitting, breakage, stone blending and future repairs.

Quantity and Coverage Guidance

MSI packages these random corner stones by square feet of exposed veneer surface, not by a published linear-foot quantity.

• One crate covers approximately 50 sq. ft.

• One crate costs $1,395 at the current $27.90-per-square-foot price.

• Do not describe the crate as one individual corner piece.

• Do not publish a linear-foot conversion unless MSI supplies one for the current production lot.

• Have the installer calculate the exposed corner surface, add 10–15%, and round up to full crates.

Care and Maintenance

• Remove dust with a soft-bristle brush or vacuum attachment.

• Clean using warm water and a neutral-pH natural-stone cleaner.

• Avoid vinegar, acidic masonry cleaners, harsh bleach solutions and wire brushes.

• Consider a breathable penetrating sealer for exterior, moisture-prone or grease-prone installations.

• Test sealers first because enhancing products can deepen the brown and gray tones.

• Inspect exterior installations periodically for loose stones, open joints, failed flashing and moisture intrusion.

Design Profile

• Aesthetic: Traditional masonry, modern lodge, organic contemporary and refined rustic.

• Color character: Warm brown and taupe blended with medium gray and occasional charcoal.

• Shape character: Irregular fieldstone forms create a softer, more organic composition than linear ledgestone.

• Visual advantage: L-shaped corners preserve the appearance of full-depth masonry around wall returns and columns.

• Complementary materials: Natural oak, walnut, weathered timber, concrete, leather and warm stucco.

• Complementary metals: Aged bronze, matte black, weathered steel and brushed stainless steel.

• Mortar color: Warm gray, taupe or buff produces a traditional masonry appearance.

Frequently Asked Questions

Does “1 Piece” mean one individual corner stone?

No. Your Shopify product represents one complete crate covering approximately 50 square feet.

What is the correct SKU?

The correct corner SKU is LVENMBEDFORFLD-COR.

Is this Bedford Brown Fieldstone?

No. This is the standard Bedford FieldStone product. Bedford Brown Fieldstone is a separate, darker product with SKU LVENMBEDBROFLD-COR.

What flat stone coordinates with these corners?

Use Bedford FieldStone loose flat veneer, SKU LVENMBEDFORFLD.

Are these ledger panels?

No. They are random loose natural-marble corner veneers designed to coordinate with irregular Bedford FieldStone flats.

Can they be used on floors or fireplace hearths?

No. MSI identifies the collection as unsuitable for flooring. These corner pieces are intended for vertical veneer surfaces.

Are the corners sold by linear foot?

The current package is expressed as 50 square feet per crate. Do not convert it to linear feet without verified manufacturer data.

Do the stones require grout?

They can be installed with visible mortar joints or tighter joints depending on the approved installation system and desired appearance.