Product Overview

Fujiwa Saga Bronze 1" × 6" Semi-Gloss Porcelain Bead Trim Tile provides a refined finishing edge for coordinating Saga Series pool, spa, shower, and feature-wall installations. Its slender, softly rounded profile creates a dimensional transition along waterlines, wall edges, niches, fountains, and decorative borders.

The Bronze colorway combines deep brown, dark bronze, black, copper, and subtly contrasting mineral tones beneath a semi-gloss glaze. Natural kiln-fired variation gives each trim piece individual depth while coordinating with Fujiwa SAGA-664 Bronze 6" × 6" field tile and SAGA-134 Bronze Blend mosaic.

This is a decorative porcelain wall trim. It is not intended to serve as a structural stair nosing, coping, handrail, or load-bearing edge.

Technical Specifications

Recommended Applications

• Swimming-Pool Waterlines: Creates a rounded accent or finishing course along coordinating Saga Bronze field tile.

• Spa Walls and Borders: Adds dimensional detail to raised spas, spillways, and decorative transitions.

• Fountains and Water Features: Provides a finished edge around tiled water-feature panels and architectural borders.

• Shower Niches: Frames recessed shelves with a coordinated rounded porcelain profile.

• Shower Walls: Finishes vertical tile transitions and decorative bands over an approved waterproofing system.

• Kitchen Backsplashes: Creates a narrow finishing edge around tiled backsplash installations.

• Bathroom Wainscoting: Caps wall-tile installations with a subtle dimensional border.

• Decorative Feature Walls: Suitable for bars, hospitality interiors, outdoor kitchens, and accent-wall transitions.

Quantity Calculation

Each 6-inch trim piece covers 0.5 linear foot.

Measure every exposed edge, niche side, waterline transition, and return separately. Add approximately 10–15% for cuts, corners, shade selection, and future repairs.

Installation Guidelines

IMPORTANT: DECORATIVE POOL AND WALL TRIM

Bead trim must be fully supported by mortar. It should not project beyond the substrate where it may be stepped on, struck, or used as a structural edge.

• Inspect and Dry-Lay: Arrange all trim pieces before installation to balance lighter copper tones with darker bronze and black areas.

• Check Coordination: Compare the bead trim with the field tile and mosaic under the project’s actual lighting. Trim is fired separately and may not be an exact shade match.

• Prepare the Substrate: Border lines must be flat, clean, structurally sound, and properly waterproofed in pools, spas, showers, and exterior wet areas.

• Mortar Selection: For submerged installations, use a premium mortar meeting ANSI A118.15 and specifically approved for porcelain tile and permanent immersion.

• Mortar Coverage: Apply enough mortar to support the entire back of each trim piece without leaving hollow areas beneath the curved profile.

• Prevent Sagging: Use non-staining wedges or low-tack tape to hold vertical pieces in position until the mortar develops adequate support.

• Align the Profile: Confirm that adjoining bead pieces maintain a continuous horizontal or vertical line without abrupt changes in projection.

• Grout Joint: Coordinate the joint width with the adjoining Saga field tile or mosaic. Follow Fujiwa and installer recommendations rather than forcing an excessively narrow joint.

• Grout Selection: Use high-performance cementitious or epoxy grout approved for porcelain and the installation environment.

• Outside Corners: Use the coordinating Saga Bronze beak piece where appropriate. Mitering the bead should be performed only by an experienced installer because the glazed edge may chip.

• Cutting: Wet-cut slowly with a clean, continuous-rim diamond blade designed for glazed porcelain.

• Movement Joints: Maintain required perimeter, change-of-plane, and field movement joints according to TCNA EJ171.

• Pool Curing: Allow waterproofing, mortar, and grout to cure fully according to their manufacturers’ schedules before filling the pool or spa.

Care and Maintenance

• Clean with warm water and a neutral-pH porcelain-tile cleaner.

• Use a soft sponge, microfiber cloth, or soft nylon brush.

• Maintain balanced pool-water chemistry to reduce calcium deposits and grout deterioration.

• Avoid steel wool, wire brushes, abrasive powders, and aggressive cleaning pads.

• Do not use undiluted acids or harsh chemical cleaners on the glazed surface.

• Remove calcium buildup with a method approved for the porcelain tile, grout, and surrounding pool finish.

• Inspect submerged grout joints and perimeter transitions periodically for cracking or deterioration.

Shade Variation

Variations in color, glaze movement, texture, and finish are inherent characteristics of kiln-fired porcelain. Saga Bronze trim may range from deep brown and black to warmer bronze and copper tones.

Because trim and field tile may be manufactured during separate production runs, an exact shade match is not guaranteed. Review the pieces together and blend them before installation. Installation constitutes acceptance of the material’s shade and surface variation.

Design Profile

• Aesthetic Inspiration: Contemporary resort, modern Mediterranean, organic luxury, dark coastal, and boutique hospitality.

• Color Character: Deep bronze, brown, black, copper, and softly contrasting mineral tones.

• Profile Character: A narrow convex bead that provides more dimension than a flat liner while remaining less substantial than a chair rail.

• Visual Advantage: The semi-gloss glaze catches water, sunlight, and architectural lighting along the raised profile.

• Complementary Fujiwa Products: SAGA-664 Bronze field tile, SAGA-134 Bronze Blend mosaic, and Saga Bronze beak corner.

• Complementary Materials: Dark stone, ivory limestone, silver travertine, charcoal plaster, teak, and warm concrete.

• Suggested Grout Colors: Dark bronze, chocolate brown, charcoal, or warm gray.

Frequently Asked Questions

How much does one bead trim piece cover?

Each 6-inch piece covers one-half linear foot. Two pieces are required for every linear foot before adding waste.

Is this product sold by square foot?

No. It is a trim piece and should be sold by the individual piece or calculated by linear foot.

What field tile coordinates with this trim?

It coordinates with Fujiwa SAGA-664 Bronze 6" × 6" semi-gloss porcelain field tile.

What mosaic coordinates with it?

Fujiwa SAGA-134 Bronze Blend porcelain mosaic coordinates with the Bronze colorway.

What is the difference between bead and beak trim?

The 1" × 6" bead creates a continuous finished border. The smaller beak piece is used to resolve certain outside corners and trim intersections.

Can this bead be installed in a swimming pool?

Yes, when installed with waterproofing, mortar, grout, movement joints, and curing procedures approved for permanent immersion.

Can it be used on steps?

It may be used decoratively on vertical step faces, but it is not a structural stair nosing and should not be positioned where it will receive foot traffic or impact.

Does the porcelain require sealing?

The glazed porcelain surface generally does not require sealing. Cementitious grout may require sealing according to its manufacturer’s instructions.

Will the trim match the field tile exactly?

Not necessarily. Trim and field tile may be fired separately, so differences in color, glaze, and texture should be expected.