Eco Ceramic Helsinki Blanco 10" x 60" Matte Porcelain Tile

Product Overview

Eco Ceramic Helsinki Blanco 10" x 60" Matte Porcelain Tile recreates the characteristic grain and knots of traditional oak in an elongated Spanish porcelain plank. Its pale whitewashed coloring, gentle gray-beige movement, and understated matte surface give floors and walls the warmth of natural wood without wood’s sensitivity to moisture or routine household wear.

The generous 10" x 60" format produces long, uninterrupted lines with fewer joints than conventional wood-look tile. Rectified edges support a clean, precisely aligned installation, while V2 shade variation introduces subtle differences among pieces without creating a heavily varied appearance.

Recommended Applications

• Living rooms, bedrooms, hallways, and open-plan residential floors

• Kitchens, dining areas, and mudrooms

• Bathroom floors where project-specific slip requirements are satisfied

• Bathroom and shower walls over an approved waterproofing system

• Retail, office, hospitality, and other appropriate medium-commercial interiors

• Feature walls and vertically installed wood-look accents

• Light-institutional interior applications consistent with its PEI 4 rating

This tile is intended primarily for interior applications. Do not specify it for pool interiors, submerged installations, exterior freeze-thaw environments, or shower floors without written approval and the required slip-performance data.

Design Profile

• Style: Scandinavian, coastal contemporary, organic modern, minimalist, and transitional

• Color Character: Whitewashed oak, pale ivory, soft greige, and restrained gray grain

• Visual Effect: Long planks help visually lengthen rooms and reduce the number of grout joints

• Layout Options: Straight lay, random plank layout, and running bond with a maximum recommended 33% offset

• Complementary Materials: White oak, walnut, limestone, warm concrete, creamy quartz, and textured plaster

• Complementary Metals: Matte black, brushed nickel, champagne bronze, and aged brass

• Suggested Grout Colors: Warm white, ivory, pale greige, or a color closely matched to the tile field

Technical Specifications

Thickness and wet-area slip ratings are not published on the current manufacturer sheet and should be confirmed before specifications requiring those values are finalized.

Installation and Handling Guidelines

IMPORTANT: LONG-PLANK INSTALLATION

The five-foot plank length requires an exceptionally flat substrate and careful layout. Evaluate the tiles and substrate before installation to control lippage.

• Open multiple cartons and dry-lay pieces before setting. Blend the subtle tonal and graphic differences throughout the installation.

• Check all cartons for matching caliber and production lot information.

• Use an ANSI A118.4 or A118.15 polymer-modified large-and-heavy-tile mortar approved for porcelain.

• Directionally trowel the mortar and back-butter the planks as needed.

• Obtain at least 80% mortar coverage in dry interiors and 95% in wet applications, with full support beneath tile edges and corners.

• Limit running-bond offsets to approximately 33% unless tile flatness has been evaluated and the installer approves another pattern.

• Rectified edges allow controlled joints but do not permit grout-free installation. Follow the manufacturer, grout producer, and installer’s joint-width requirements.

• A tile-leveling system may help manage adjoining edges, but it does not correct an uneven substrate.

• Incorporate perimeter and field movement joints in accordance with TCNA EJ171 and applicable building requirements.

• Use wet-cutting equipment or approved dust-control methods. Cutting porcelain can release respirable crystalline silica.

• Order approximately 10–15% additional material for cuts, layout selection, breakage, and future repairs. More may be needed for diagonal or complex layouts.

Care and Maintenance

• Clean routinely with warm water and a neutral-pH porcelain-tile cleaner.

• Remove loose grit with a soft broom, microfiber mop, or nonabrasive vacuum attachment.

• Avoid waxes, oily soaps, and cleaners that leave a slippery residue.

• Do not use steel wool or aggressive abrasive pads.

• Clean spills promptly and rinse away remaining detergent.

• Porcelain normally does not require sealing. Cement-based grout may require sealing according to its manufacturer’s instructions.

Shade Variation

Helsinki Blanco has a V2 shade-variation rating, indicating slight differences in color and surface graphics between pieces. These controlled variations support a more natural wood appearance. Inspect the delivered material and blend tiles from multiple cartons before installation.

Frequently Asked Questions

Is Helsinki Blanco natural wood?

No. It is a Spanish porcelain tile created with digital inkjet technology to reproduce traditional oak grain and knots.

Is the tile rectified?

Yes. Its mechanically finished edges support precise alignment and controlled grout joints. Rectified tile must still be installed with grout.

How much variation should be expected?

Helsinki Blanco is rated V2, meaning slight but visible differences may occur between pieces. Blend material from several cartons during installation.

Can it be used on floors?

Yes. Its PEI 4 rating supports residential floors as well as appropriate medium-commercial and light-institutional applications.

Can it be installed in a shower?

It may be installed on shower walls over a complete waterproofing system. Shower-floor use should not be specified without suitable wet-area slip-performance data.

Does the porcelain require sealing?

The porcelain surface normally does not require sealing. Cementitious grout may benefit from a penetrating grout sealer.

How many tiles are packaged in a carton?

The manufacturer’s packing chart lists four 25 x 150 cm planks per carton, covering approximately 16.15 square feet.