Helsinki Taupe 10" x 60" Matte Porcelain Wood-Look Tile

Product Overview

Elysium Helsinki Taupe 10" x 60" Matte Porcelain Tile combines the natural warmth of weathered wood with the strength and easy maintenance of porcelain. Its elongated plank format features taupe brown, muted beige, and soft gray tones enhanced by realistic wood-grain movement.

High-definition inkjet technology creates varied surface graphics that reproduce the character of natural timber without the refinishing, moisture sensitivity, or routine sealing required by hardwood. Rectified edges support clean grout joints, while the understated matte finish complements contemporary, Scandinavian, coastal, rustic, and transitional interiors.

Technical Specifications

Recommended Applications

• Living Rooms and Open Interiors: Creates the visual warmth of long hardwood planks in an easy-care porcelain surface.

• Kitchen and Dining Floors: Provides a moisture-resistant alternative to genuine wood around cooking and dining areas.

• Bathrooms: Suitable for properly prepared bathroom floors and full-height walls.

• Shower Walls: The 60-inch plank creates a dramatic horizontal or vertical feature when installed over an approved waterproofing system.

• Bedrooms and Hallways: Supports visual continuity across adjoining residential spaces.

• Commercial Interiors: Its PEI 4 rating supports appropriate medium-traffic retail, office, restaurant, and hospitality installations.

• Feature Walls: Can be installed vertically or horizontally to create architectural wood-look surfaces.

Installation and Handling Guidelines

⚠️ IMPORTANT: EXTRA-LONG PORCELAIN PLANK

The 60-inch length requires a particularly flat substrate, proper handling, and careful mortar coverage. Professional installation is recommended.

• Inspect Before Installation: Confirm the color, caliber, finish, and quantity before setting the material. Installed tile is generally considered accepted.

• Blend Multiple Cartons: Distribute the V2 tonal and wood-grain variation throughout the installation rather than installing one carton at a time.

• Substrate Flatness: Correct high and low areas before installation. Extra-long planks can develop noticeable lippage over an uneven substrate.

• Mortar Selection: Use an ANSI A118.4 or A118.15 polymer-modified Large and Heavy Tile mortar approved for porcelain.

• Mortar Coverage: Directionally trowel the mortar and back-butter every plank as necessary. Obtain at least 80% coverage in dry interiors and 95% in wet areas.

• Offset Limitation: Use a maximum running-bond offset of approximately 33% unless tile flatness has been evaluated and the installer approves another layout.

• Grout Joint: Rectified tile still requires grout. The final joint width must accommodate actual tile calibration, substrate conditions, and installer recommendations.

• Lippage-Control System: A leveling-clip system may help maintain consistent elevation between adjoining planks but does not correct an uneven substrate.

• Wet Areas: Install shower walls over a complete waterproofing system. Tile and grout do not replace waterproofing.

• Shower-Floor Limitation: This 10" x 60" plank is generally unsuitable for conventional shower floors because it cannot easily follow the required drainage slope.

• Movement Joints: Include perimeter and field movement accommodation following TCNA EJ171 and applicable construction requirements.

• Cutting and Handling: Support the entire plank during transportation and cutting. Wet-cut with a porcelain-rated diamond blade and do not dry-cut or grind.

• Order Allowance: Add approximately 10–15% for straight layouts and 15–20% for diagonal, patterned, or highly selective installations.

Care and Maintenance

• Sweep or vacuum regularly to prevent abrasive grit from accumulating.

• Clean with warm water and a neutral-pH porcelain tile cleaner.

• Avoid waxes, oil-based soaps, and cleaners that leave a slippery or cloudy film.

• Use soft nylon brushes or non-abrasive pads for stubborn residue.

• Rinse away detergent residue thoroughly after cleaning.

• Porcelain normally does not require sealing. Cement-based grout may require sealing according to its manufacturer’s instructions.

Shade Variation

Helsinki Taupe carries a V2 moderate-variation rating. Subtle differences in color, wood-grain movement, and graphic detail should be expected between individual planks.

Open several cartons and approve the blended layout before installation. Samples provide a general representation but cannot display every graphic variation within the collection.

Design Profile

• Aesthetic Inspiration: Scandinavian interiors, organic modern, contemporary rustic, coastal minimalism, and warm transitional design.

• Color Character: Taupe brown with weathered beige, soft gray, and muted earthen undertones.

• Visual Advantage: The extra-long 60-inch format creates an expansive hardwood appearance with fewer interruptions.

• Layout Options: Straight plank, random stagger, one-third offset, vertical wall installation, and installer-approved herringbone.

• Complementary Materials: Cream limestone, ivory quartz, warm concrete, plaster walls, blackened steel, and natural textiles.

• Complementary Metals: Matte black, aged bronze, brushed nickel, and champagne bronze.

• Suggested Grout Colors: Taupe, mushroom, light brown, or warm gray creates a coordinated plank appearance.

Frequently Asked Questions

Is Helsinki Taupe genuine wood?

No. It is a porcelain tile manufactured with inkjet technology to reproduce the color and grain movement of natural wood.

What is the manufacturer’s item code?

The Elysium Tiles item code is P4127.

What finish does this tile have?

Helsinki Taupe has a natural-looking matte finish.

How much material is packaged in one box?

A standard carton contains four tiles covering approximately 16.15 square feet. Verify current packaging before ordering.

What does the PEI 4 rating mean?

PEI 4 indicates suitability for residential floors and appropriate medium-commercial or light-institutional traffic.

Can it be installed on shower walls?

Yes. The tile may be installed over a complete waterproofing system using mortar approved for large-format porcelain.

Can it be installed on a shower floor?

The 10" x 60" format is generally unsuitable for a conventional sloped shower floor. A smaller coordinating tile is recommended.

Does it require sealing?

The porcelain surface normally does not require sealing. Cement-based grout may require a suitable grout sealer.

Will every plank look identical?

No. Helsinki Taupe has a V2 variation rating, so moderate differences in tone and wood-grain graphics should be expected.