Product Overview
KLM Series Misty Brown 3" x 3" Porcelain Pool Tile brings earthy warmth and subtle natural texture to swimming pool waterlines, spas, and outdoor water features. Featuring a soft, multi-tonal Misty Brown glazed finish with gentle taupe and clay undertones, this tile offers a sophisticated, organic alternative to traditional blue pool tiles.
Mounted on flexible mesh backing sheets, the 3" x 3" mosaic format simplifies installation around pool perimeters, curved spa walls, and raised spillways. Crafted from high-density vitrified porcelain, it is built for continuous submersion, effortlessly withstanding chlorine, salt water, intense UV sunlight, and extreme freeze-thaw cycles without fading or degrading.
Technical Specifications
| Technical Property |
Value / Specification |
Notes / Compliance |
| Collection / Series |
KLM Series |
Aquatic Glazed Porcelain Mosaic |
| Nominal Tile Size |
3" x 3" (7.5 cm x 7.5 cm) |
Square Mosaic Chip |
| Sheet Format |
Interlocking Mesh-Backed Sheet (~12" x 12") |
Pre-Assembled Mosaic Sheet |
| Thickness |
Approx. 1/4 in. (6.5 mm to 7 mm) |
Standard Mosaic Thickness |
| Material Type |
Glazed Vitrified Porcelain |
Impervious Ceramic Body |
| Surface Finish |
Smooth Satin / Low-Luster Glaze |
Non-Porous Aquatic Glaze |
| Color Profile |
Misty Brown (Warm Taupe, Clay & Earthy Brown) |
Subtle Tonal Variation (V2) |
| Edge Detail |
Smooth Pressed Edge |
Designed for Grouted Joint Layout |
| Recommended Applications |
Pool Waterlines, Spas, Fountains, Step Markers, Wet Walls |
Submerged & Outdoor Wet Locations |
Recommended Applications
-
Swimming Pool Waterlines: The 3" x 3" grid format creates an organic, warm waterline border along pool perimeters that naturally disguises mineral deposits and water lines.
-
Spas & Radiused Water Features: Ideal for wrapping contoured spa seating, rounded hot tub rims, spillways, and garden fountains where larger flat tiles cannot bend.
-
Pool Steps & Sun Shelves: Serves as a durable visual safety marker along underwater step edges, tanning ledges, and beach entries.
Installation & Handling Guidelines
⚠️ IMPORTANT: POOL & WET-AREA INSTALLATION PROTOCOL
-
Submerged Mortar Selection: Install sheets using a polymer-modified thin-set mortar specifically rated for submerged porcelain mosaic installations and exterior freeze-thaw conditions (ANSI A118.4 or ANSI A118.15).
-
Substrate & Waterproofing: Ensure concrete pool shells, mud beds, or backer boards are fully cured, sloped, and treated with an approved waterproof membrane prior to tile setting.
-
Grout Selection: Use a chemical-resistant, pool-grade cementitious or epoxy grout designed to withstand salt systems, chlorine, and chemical water treatments.
-
Sheet Bedding: Lightly tap mosaic sheets into the wet mortar bed using a wooden block or beating float to ensure uniform chip height and 100% mortar contact behind the mesh backing.
Care & Maintenance
-
Pool Chemistry Balance: Maintain balanced pool water chemistry (pH, alkalinity, and calcium hardness) to protect grout joints and prevent mineral scaling.
-
Routine Cleaning: Clean waterline scale with non-abrasive pool tile cleaners and soft nylon brushes. Avoid harsh wire brushes that could scratch the glazed surface.
-
Zero Sealing Required: Glazed porcelain is virtually non-porous and never requires topical sealers or impregnators.
Design Profile
-
Aesthetic Inspiration: Earthy Modernism, Desert Oasis, Japanese Wabi-Sabi, Natural Lagoon Spa.
-
Visual Advantage: The Misty Brown palette pairs beautifully with natural stone coping and warm landscape features, giving pool water a rich, tropical lagoon appearance.
-
Complementary Finishes: Tan, buff, or natural travertine pool coping, French gray or pebble plaster finishes, copper water spouts, and warm timber decking.
Frequently Asked Questions
Is KLM Series Misty Brown tile suitable for saltwater pools?
Yes. Vitrified glazed porcelain is non-porous and highly resistant to salt, chlorine, and pool water treatment chemicals.
Can 3" x 3" mesh-backed sheets be cut to fit narrower waterline bands?
Yes. The mesh backing can easily be cut with a utility knife between tile rows to create 3-inch, 6-inch, or custom-width trim strips.
Is this mosaic frost-proof for cold, freeze-thaw climates?
Yes. KLM Series porcelain tiles are frost-resistant when installed using proper exterior-grade mortars, waterproof membranes, and pool-rated grouts.
