MSI 6X24 Cosmic Gray Stacked Stone

The "Majestic Depth" of the Collection

While pastel shades or standard baby blues create a typical backyard pool look, the Vinta Royal Blue 2" x 4" Porcelain Tile delivers an elite, estate-level presence. It is the premier choice for a Classic Mediterranean, Regal Estate, or High-Contrast Contemporary aesthetic, utilizing a rich, deeply saturated cobalt-to-indigo glaze that frames the water with authoritative structural lines and makes the pool body appear dramatically deep, clear, and inviting.

Fujiwa Vinta Series Catalog Layout. Source: Little Tile Inc

Vinta Series: Vinta Royal Blue 2" x 4" Porcelain Pool and Submerged Mosaic

Anchoring your luxury hardscape with a legacy color palette, the Vinta Royal Blue Porcelain Tile redefines underwater boundaries. Manufactured by industry leader Fujiwa Tile, this pool-grade mosaic blends time-tested durability with striking architectural scale. The "Royal Blue" colorway features a deep, jewel-toned glass glaze layer that captures direct sunlight, casting an intense, premium-resort blue hue across your entire pool surface.

The modern 2" x 4" running-bond subway pattern delivers clean, horizontal alignment on a convenient 11.75" x 11.75" mesh-mounted sheet. Fired under high-heat vitrification protocols, this heavy-duty porcelain mosaic boasts an impervious composition that effortlessly survives freezing climates, heavy chemical balancing, and intense UV sun exposure. The smooth, glass-like finish behaves like a protective shield, allowing pool owners to effortlessly brush away waterline oils, dust, and stubborn hard-water scaling.

Technical Specifications

Recommended Applications

Confirm the current manufacturer approval for the intended floor, wall, shower, pool, exterior, or commercial installation before specifying this product.

Installation & Handling Guidelines

⚠️ CRITICAL: THINSET MIX & DEPTH COVERAGE

For fully submerged settings and pool waterlines, you must use a high-performance, polymer-modified thinset mortar rated for underwater applications (ANSI A118.15 compliant). Achieving a minimum of 95% mortar-to-tile contact is non-negotiable; air voids can collect water, expanding during winter freezes and cracking the mosaic joints.

Manufacturer Recommendations

• Recommended Grout: Use a Waterproof Polymer-Modified Sanded Grout or high-durability Epoxy Grout. A crisp "Bright White" or "Light Gray" grout choice contrasts beautifully with the deep blue glaze, highlighting the clean subway brick geometry.

• Substrate Cleanliness: Concrete shotcrete/gunite surfaces must be cured for at least 28 days and pressure-washed completely free of efflorescence, oils, or loose dust before mortar application.

• Expansion Joint Rules: Install flexible, pool-grade silicone expansion joints every 8 to 12 feet at the waterline to give the tile framework room to move safely during seasonal temperature changes.

• The Horizontal Combing Rule: Always comb your thinset ridges horizontally along the waterline. When you push the mesh-mounted sheets into place, horizontal ridges allow air to exhaust freely from the side joints, reducing thinset squeeze-through.

• The Block Flattening Step: Do not use bare fingers to level individual 2" x 4" bricks. Press the backing into the wet mortar, then place a flat scrap piece of wood over the sheet and tap evenly with a rubber mallet to achieve a smooth plane.

• Waterline Horizon Check: Establish your layout alignment using a precise laser level relative to your skimmer mouth or perimeter overflow lip. Because royal blue creates a high-contrast boundary line, minor leveling errors show up instantly.

Care & Maintenance

Use a cleaner appropriate to the listed material and follow the manufacturer’s maintenance instructions. Test any cleaner or sealer on a spare piece first.

Design Profile

• Saturated Royal Cobalt Glaze: A deep, regal blue finish designed to magnify water reflections, providing a classic, highly polished look to waterlines.

• Architectural Subway Layout: The 2" x 4" brick-joint pattern creates structural lines that lengthen pool borders compared to standard small square tiles.

• Fully Vitrified Porcelain Build: High-density kiln firing keeps water absorption below 0.5%, protecting the tile shell against winter frost heave.

• Waterline Film Resistance: Non-porous surface glaze easily sheds body oils, sunscreens, and calcium deposits for quick, painless maintenance.

• Interlocking Mesh Form: Flexible backing sheets link together seamlessly, allowing swift installation along long pool lines or tight radius spa corners.

Frequently Asked Questions

Q: Will the deep royal blue color fade from heavy chlorine or salt pool systems?

A: No. Fujiwa pool tiles use high-purity inorganic mineral glazes that are permanently baked into the porcelain body at temperatures over 2,000°F. The color is locked in and will never bleach, oxidize, or cloud from chemicals or UV light.

Q: Does a dark tile like Royal Blue show white hard-water calcium lines?

A: Darker tones show white calcium crust (scaling) more clearly than pale white or gray tiles. However, the smooth high-gloss glaze makes removing scaling simple; an occasional wash with a pool-safe scale cleaner keeps it looking brand new.

Q: Can this mosaic mesh handle tight curved corners or round spa columns?

A: Yes, perfectly. The vertical grout lines every 4 inches on the flexible mesh sheet allow it to curve smoothly around radius pool steps, built-in benches, and circular spa shapes without needing to cut individual tiles.